14
Preparation to use MediaShareMEGA
Procedure
1.
Check whether all accessories are supplied in the box.
2.
Install HDD(Hard Disk Drive) into MediaShareMEGA according to the procedure of
HDD installation(
※
Note : HDD jumper should be set as Master)
3.
Connect AC adapter to the MediaShareMEGA, and then connect MediaShareMEGA
with PC through A to B USB cable
4.
Turn on the MediaShareMEGA.
5.
If the HDD is not formatted, please format it thru from your PC. (* Note: Please read
how to format HDD via USB)
6.
Copying movie or picture, or music files to your MediaShareMEGA from your PC.
7.
After copying files, disconnect MediaShareMEGA from your PC.
8.
Connect MediaShareMEGA to your TV and/or audio system.
9.
Turn on the MediaShareMEGA, and change setup at SETUP menu. If you changed
your network set-up, please turn off and on again.
10.
Now, you are ready to enjoy MediaShareMEGA.
HDD Size
HDD Type
HDD Capacity
HDD RPM
HDD buffer
memory
8.9Cm IDE HARD
IDE 40 pin
Any capacity
available in market
Over 4200 RPM
Over 2M
8.9Cm SATA HARD
SATA I or II
Any capacity
available in market
Over 7200 RPM
Over 8M
Kinds of HDD to be installed
2
Содержание MediaShare MEGA
Страница 1: ......