Manual cooking taking place
Timer in operation
And -Auto- (both flashing) programmer error.
Digital clock
Oven clock shows 24-hour time. Upon immediate power up of the oven or after a blackout,
three zeros will flash on the programmer panel. To set the oven clock local time please
press and buttons simultaneously, and adjust by pressing [+] and / or [-] buttons
until you have the exact hour. The regulation speed depends on the pressure applied on the
[+] [-] buttons.
Manual cooking without using the programmer
To operate the oven manually, that is without using the auxiliary programmer, it is
necessary to cancel the flashing -Auto- by pushing and buttons at the same time
to set it on manual mode.
Automatic cooking (start and finish)
1) Set the cooking duration by pressing button.
2)Set the end of cooking time by pressing button.
3)Set the temperature and cooking program by using the thermostat knob and the selector
knob.
After done with the setting, -Auto- symbol will flash, this means the oven has been
programmed.
For example: cooking lasts 45 minutes and is expected to stop at 14.00.
-
Press and set to 0.45
-
Press and set to 14.00
After finishes the setting, the clock hour will appear on the panel and -Auto- symbol will be
on. This means the cooking program has been entered to the programmer.
At 13.15 h. (45 minutes to 14) the oven turns on automatically. During cooking duration,
button and -Auto- are flashing.
At 14.00 h. the oven turns off automatically, a buzzer goes off until it is stopped by
pressing any function key button.
Page
V 2.0
17
