Warning!
Make sure the trivets are placed at the correct position. Take note of the 4mm high bumps at
the stainless steel panel, and match it with corresponding concavity of trivets. Trivets
reposition between different burners are not allowed. Below shows an example :
Concavity
Bumps
Concavity
Electrical Connection
WARNING: THIS APPLIANCE MUST BE EARTHED
For a direct connection to the electric network is necessary to mount a circuit breaker
before the appliance according to the electrical regulation.
Before making connection to the electrical network, check that the domestic system and
the limiter valve can take the appliance load.
The supply cord must be positioned at such point where the temperature of the point is
NOT possible to reach 50K or higher than the ambient temperature.
Means for disconnection must be incorporated in the fixed wiring in accordance with the
wiring rules.
Page 10
V 2.0
