Installation & Operation Manual:
Automated Forklift Entryway Sanitizing System
_________________________________________________________________________________________________
6 |
P a g e
TOOLS NEEDED TO INSTALL:
Adjustable Wrench
Used to tighten nozzle bodies and
adjust nozzles
Pliers
Used to tighten nozzle bodies and
adjust nozzles
Angle Cutters
Used to cut plastic ties
Tape Measure
Used to measure sensor height
Tubing Cutter (provided)
Used to cut tubing
NOTE
All components of this system are attached to the vehicle with magnets. The only tools needed
for installation are an adjustable wrench, pliers, diagonal cutters, tape measure, and the tubing
cutter supplied in this kit. The tubing connections are a push-fit style connection which when
firmly pushed into the fitting will provide a tight, leak free connection. To release a push-fit style
connection, press in on the fitting collar while pulling on the tubing.
