Instruction
manual
PK
25/2
page
9
___________________________________________________________________________
5.2. Explanation of the application range
Our hydraulic crimping tool type PK 25/2 has a large number of
various dies (Pos.-No. 1) available to crimp primarily copper and
aluminium but also other connecting material.
Table 2
Picture 3
Crimping range
Connecting material
___________________________________________________________________________________________________________
a 16-400
mm² Tubular cable lugs and connectors „Standard type“
________________________________________________________________________________________________________
b 16-625
mm² Compression cable lugs and joints DIN 46235/DIN 46267
___________________________________________________________________________________________________________
c 10-500
mm² Aluminium cable lugs and connectors
________________________________________________________________________________________________________
d 25-300
mm² Compression joints for full-tension connections for Aldrey
conductors acc. to DIN 48201, sheet 6 and Al-conductors acc. to
DIN 48201, sheet 5, 120-300 mm²
________________________________________________________________________________________________________
e 25/4-120/20 mm² Compression joint acc. to DIN 48085 part 3 for Al-/Steel cables
acc.
to
DIN
48204
___________________________________________________________________________________________________________
f 10-240 sm
mm² Pre-rounding dies for Al- and Cu-Sectorconductors
35-300
se mm²
___________________________________________________________________________________________________________
g 10-50
mm² Solderless Terminals DIN 46234,
Pin
terminals
DIN
46230
___________________________________________________________________________________________________________
h 10-150
mm² Insulated Terminals
___________________________________________________________________________________________________________
i 16-300
mm² Tubular cable lugs for fine-stranded conductors
___________________________________________________________________________________________________________
j 4-50
mm² C-clamps
___________________________________________________________________________________________________________
k 10-150
mm² Pre-insulated tubular cable lugs and connectors,
insulated
pin
cable
lugs
___________________________________________________________________________________________________________
l 2x50-2x120 mm² Double compression cable lugs
___________________________________________________________________________________________________________
m 25-185
mm² Cable-End sleeves
Attention
Only crimp copper and Aluminium connecting material or special
connecting material which are mentioned in table 2.
If different conducting materials have to be crimped, please contact the manufacturer.
Attention
Do not use on or near live circuits.
Before starting to crimp please make sure that all parts involved in the crimping process
are not connected to live circuits.
The tool can be operated in a temperature range from -20°C to +40°C indoors and
outdoors.
I
