Instruction
manual
PK
25/2
page
11
___________________________________________________________________________
5.4. Service and maintenance instruction
The hydraulic tool must be cleaned and dried after each use. The tool is maintenance free.
After one year we recommend sending the tool in to the manufacturer for an inspection.
5.5. Reference as to which spare parts can be exchanged by the customer
Within the determined use of the tool only the dies (Pos.-No. 2+3) are permitted to be
changed by the customer.
Do not attempt to repair the tool yourself, and do not remove any parts such as screws and
other components.
6. Troubleshooting
- The tool loses oil.
=>
Return the tool to the manufacturer. Do not open the tool.
7. Technical Data
Crimping
force:
approx.
250
kN
Weight:
approx.
5,25
kg
Max. operation pressure:
630-700 bar
Length incl. coupling:
approx. 335 mm
Symbols
Safety warnings
Please do not disregard these instructions in order to avoid human injuries
and environmental damages.
Operational warnings
Please do not disregard them to avoid damaging the pump unit.
Note
Additional copies of this manual are available without charge. The part # is HE.8211_B.
I
