Klark Teknik DM8000 Скачать руководство пользователя страница 35

Страница: 35 / 65

DM8000 User Manual

Take note of the following considerations:

•

RVC connects to one of the GPIO pins used for volume adjustment.

•

AUX connects to one of the GPIO pins used for selecting which channel’s

volume is active and available for adjustment.

NOTE

: Once the CP8000UL/CP8000EU RVC and AUX pins each connect

to a specific DM8000 GPIO pin (1 thru 6), those pins cannot be used for

other functions.
After connecting CP8000UL/CP8000EU devices to DM8000, the user can then

use the DM8000 DSP Designer software to launch dedicated CP8000 modules for

remote configuration and control.

CP8000 dialog Boxes

In the software, when the user chooses a new CP8000 module and drops

the module into the Build Window, the software will automatically launch a

Parameter Dialog Box so that users may select and designate specific GPIO pins

for AUX and RVC.
For example, the following screenshots show the CP8000 AUX pin being assigned

to Pin 4 of the DM8000 GPIO port, while the CP8000 RVC pin is assigned to Pin 6:

CP8000 Parameters Dialog Box for AUX Pin Assignment to GPIO

CP8000 Parameters Dialog Box for RVC Pin Assignment to GPIO

After selecting and assigning GPIO pins for AUX and RVC, double-click on the

CP8000 module to launch a Control Dialog Box to select which specific Input

Output Module (see “3.1 Input Output Modules”) will have its volume controlled

from the CP8000 series unit.

CP8000 Control Dialog Box for Selection of Input Output Module and CP8000 Controller Button

The left-hand Module pulldown menus contain a list of Input Output Modules

available for volume control.

CP8000 Control Dialog Box with Module Pulldown Menu

The right-hand Channel pulldown menus contain a list of CP8000UL/CP8000EU

panel buttons available for assignment. (Each CP8000 device has 6 buttons on

the front panel available for assignment.)

CP8000 Control Dialog Box with Channel Pulldown Menu

After completing the DM8000 system design in the DM8000 DSP Designer

software, compile and download to device.
The CP8000 device can now control the assigned volume parameter as

designated in the CP8000 module.

GND

+5V

GPIO 1~6

CP8000EU/UL

GND

VDC

RVC

AUX

GPIO Port

DM8000

Содержание DM8000


































































Результаты поиска

Содержание DM8000

Отзывы:

Похожие инструкции для DM8000

Бренды по названию

Популярные бренды

Klark Teknik DM8000, Руководство пользователя

Результаты поиска

Содержание DM8000

Отзывы:

Похожие инструкции для DM8000

Бренды по названию

Популярные бренды