Klark Teknik DM8000 Скачать руководство пользователя страница 16

Страница: 16 / 65

DM8000 User Manual

3.2.1 Auto Mixer
Auto Mixer

modules automatically adjust and balance levels for multiple inputs

before sending the combined signal to a single output.

Auto Mixer Module Icons

Auto Mixer Component Objects

Auto Mixer dialog Boxes

Double-click to open the

Control Dialog Box

and access the following settings:

Auto Mixer Dialog Box

•

Mute In

turns the input signal on or off .

•

Level In

adjusts the relative input volume.

•

Mute Out

turns the output signal on or off .

•

Level Out

adjusts the relative output volume.

Mic Options
Mic Options

opens a separate control dialog box to establish global settings:

Auto Mixer Mic Options Dialog Box

•

Designated Mic On / Last Mic Hold

determines which microphone (if any)

will stay/become active when no signal is present.

•

Logic Outputs Follow Mic Logic

assigns logic outputs to follow

Designated Mic On / Last Mic Hold.

•

Open Mic Limits

enables (and designates) a maximum allowable number

of active microphones.

Channel Settings
Channel Settings

can be accessed by right-clicking over the Row ID assignment

nodes. Channel Settings affects individual channel settings, but may also be

applied globally to all channels within the Auto Mixer module.

Channel Settings Dialog Box

•

Manual

turns channel gating on or off .

•

NOM Gain

activates/deactivates the channel contribution to NOM

(number of open mics) attenuation.

•

Direct Output

designates channel direct output signal as Post Gate /

Pre NOM or Post Gate / Post NOM. (Direct Outputs must be enabled when

placing Auto Mixers from the Module Library Toolbar.)

•

Set All

causes current Channel Settings to be applied to all channels.

•

Off Attenuation

determines the amount of attenuation applied when the

channel is inactive.

•

Gate Hold Time

determines length of time before the channel becomes

inactive once signal is no longer present.

Содержание DM8000


































































Результаты поиска

Содержание DM8000

Отзывы:

Похожие инструкции для DM8000

Бренды по названию

Популярные бренды

Klark Teknik DM8000, Руководство пользователя

Результаты поиска

Содержание DM8000

Отзывы:

Похожие инструкции для DM8000

Бренды по названию

Популярные бренды