Page 13
Page 12
MAINTENANCE
Replacing the Door Lamp
1.
Unplug the oven and allow it to cool down completely .
2.
Open the door completely .
3.
Remove the inner glass panel by pulling the glass-holder tabs (Fig. 8) and lifting the glass carefully up and back
towards you (Fig. 9) .
4
. Place the glass panel on the countertop gently .
5.
Unplug the yellow door light connector by pulling the two sides apart gently (Figs. 10–11) .
6.
With a Phillips-head screwdriver, unscrew and remove both light cover brackets (Figs. 12–14) .
Figure 8
Figure 9
Figure 12
Figure 13
Figure 14
Figure 10
Figure 11
7.
Slide the LED light assembly out of the light cover (Figs. 15–16) .
8
. Carefully unsnap the LED light assembly from the wire clip and replace it with the new LED light assembly
(Figs. 17–19) .
9.
Replace the top cover bracket, but do not fully tighten the screws yet (Figure 20).
10.
Slide the LED light assembly fully into the light cover (Figs. 21–22).
Figure 20
Figure 15
Figure 16
Figure 21
Figure 22
Figure 17
Figure 18
Figure 19
