Page 19
Page 18
11.
Hold the door as shown in Figure 40.
12.
Slightly lift and swing the door out of the unit (Figs. 41–42).
To reattach the door, reverse the above procedure.
Note: To reinstall the door properly, the notch on the bottom of the hinge (Fig. 43) must be positioned in the inner
frame of the door hinge (Fig. 44).
Figure 40
Figure 41
Figure 42
Figure 43
Figure 44
Replacing the Fuse
1.
Press on the cover of the fuse holder and rotate it about 20° counterclockwise .
2.
Remove the cover of the fuse holder .
3.
Remove the fuse from the cover .
4.
Replace the fuse with an identical one .
5.
Reposition the cover of the fuse holder .
6.
Press the cover and rotate it about 20° clockwise .
Resetting the Safety Thermostat
1.
This oven is equipped with a manually resettable safety thermostat designed to protect the oven from
overheating . If triggered, the thermostat completely deactivates the oven to avoid permanent damage .
2.
To reset the safety thermostat, screw the cap counterclockwise . Remove the cap to reveal the reset button . Press
the reset button, then replace the cap and screw it clockwise .
3.
If the safety thermostat shuts the oven off, then before turning the oven back on, be sure to verify that the
total amps being drawn by all the appliances, lights, etc . on the same circuit do not exceed the amps available
on that circuit .
