27 / 97
83000102.Ko
3.14.
CIP Chiller interface panel (accessories)
The CIP accessory is a transfer station that can be installed in the customer's cold water circuit. The transfer
station is made of Üsheet steel and contains a water filter, a flow rate indicator, inlet and outlet valve,
pressure and temperature displays as well as a connection to an emergency cooling system.
Figure 9: Chiller Interface Panel
4.
Safety
The chiller, within the sense of its intentional use, is designed to operate safely, provided also that the
instructions concerning transport, installation, commissioning/startup and maintenance given in these
operating instructions are complied with.
4.1.
General information
The chiller contains a high-pressure circuit. The maximum pressure that occurs is 45 bar. Even when inactive
or disconnected from the power supply the circuit is still under pressure.
4.2.
Hazard warnings
A number of warning labels are applied to the machine. Keep these warnings clean at all times. Damaged
or missing warnings must be replaced.
