Kiwi Technics Kiwi-30, Руководство пользователя

Страница: 18 / 66

18
Sequencer
The Kiwi-30 Upgrade contains a
polyphonic 6 track sequencer that
has the capacity of 124 step
automatic playing.
The clock for the Sequencer is
always the Master Clock and this can
be divided by one of 13 different
ratios including swing options. The
Seq Clock Divide parameter is 437
and can also be edited by pressing
the 'DYN' button while in SEQ MODE.
Note - If the Master clock source is
set to the Midi Clock and no midi
clock is present the Sequencer will
not run.
1=Half Note
2=Quarter note
3=8th note
4=8th note, half swing
5=8th note, full swing
6=8th note triplets
7=16th note
8=16th note, half swing
9=16th note, full swing
10=16th note triplets
11=32nd note
12=32nd note triplets
13=64th note triplets
SEQ SELECT
While in SEQ MODE a Tone button '1-
8' can be used to select and load a
sequence.
There are 8 Sequence memories and
only one of these can be selected at
a time. If a new sequence is loaded
while one is playing the playing one
will finish before the new one will take
effect.
SEQ EDIT
A long press of the 'WRITE' button will
enter sequence edit mode (see the
sequence edit section)
SEQ STEP TIMING
Pressing button 'DYNAMICS' while in
SEQ MODE is a shortcut to editing
parameter 437 Seq Step Timing. The
step timing is changed using the 'UP'
and 'DOWN' button. Press
'DYNAMICS' again to exit this mode.
SEQ ERASE
To Erase a Sequence press the
Button 'BANK/SET' while in SEQ
MODE. This will need to be followed
by the Sequence number and the
'WRITE' button to perform the erase.
This button followed by a tone button
1-8 followed by the WRITE button will
blank a sequence
www.kiwitechnics.com Kiwi-30 Upgrade User Manual v121