Kiwi Technics Kiwi-30, Руководство пользователя

Страница: 12 / 66

12
Kiwi-30 BUTTONS
WRITE BUTTON
The 'WRITE' button has different
operations depending on the mode
the Kiwi-30 is currently in.
For writing a Tone to permanent
memory in normal play mode press
'WRITE' then enter the Set, Group,
Bank and Tone number (1111-3888).
The actual write to memory is done
when the last digit is pressed.
A Tone can be easily copied from
one location to another by selecting
a different Tone number between the
load and the save.
If you are editing a sequence then
the editing can be finished by
pressing the Write if you wish to save
the seq edit to permanent memory.
To save a sequence press 'WRITE'
(while in Seq Edit Mode) followed by
Tone 1-8.
When the Kiwi-30 is in DUMP mode a
press of the 'WRITE' button is used to
start a dump after the dump type has
been selected using the '1-5' buttons.
The Kiwi-30 supports loading dumps
in from the following dump formats.
Roland MKS-30, Roland JX-8P, JX-10 &
MKS-70, Kiwi-30, Kiwi-8P, Kiwi-1000 &
Kiwi-106 dumps. These will not always
sound the same as they did on the
various other synths though as both
the hardware and tone processing is
not the same.
UP/DOWN BUTTONS The 'UP' and 'DOWN' buttons have
different operations depending on
the mode the Kiwi-30 is currently in.
TONE MODE (Menu Level 1)
The 'UP' & 'DOWN' buttons will step
(and load) the current Tone up or
down. i.e. if Tone #1112 is playing
tone #1113 will load and sound if
'UP' is pressed.
ARP MODE (Menu Level 2)
The 'UP' & 'DOWN' button will edit
the ARP Step Timing if the
DYNAMICS button has been pressed
while in ARP Mode. Press the
DYNAMICS button again to exit this
mode.
SEQ EDIT MODE (Menu Level 3)
The 'UP' & 'DOWN' button will edit
the SEQ Step Timing if the
DYNAMICS button has been pressed
while in SEQ Mode. Press the
DYNAMICS button again to exit this
mode.
NAME EDIT MODE (Menu Level 5)
The 'UP' & 'DOWN' buttons will step
the letter being edited which will flash
on the display. The DYNAMICS button
will step the letter being edited to the
LEFT and PARAMETER button will
step the letter being edited to the
RIGHT.
CLOCK MODE (Menu Level 6)
The 'UP' & 'DOWN' buttons will step
the current CLOCK RATE. The range
is 5 to 299 BPM. Holding down the
button will scroll the value at a faster
rate.
PARAMETER EDIT MODE
The 'UP' & 'DOWN' buttons will step
the value of the selected Parameter.
Holding down the Up or Down button
will scroll the value at a faster rate.
www.kiwitechnics.com Kiwi-30 Upgrade User Manual v121