Kiwi Technics Kiwi-30, Руководство пользователя

Страница: 13 / 66

13
Kiwi-30 BUTTONS
BUTTONS '1' to '8'
The buttons '1-8' have different
operations depending on the mode
the Kiwi-30 is currently in.
TONE MODE (Menu 1)
The '1-8' buttons are used to select a
Tone to Load. Tones have numbers
starting at 1111 and ending at 3888.
e.g. to load tone number 2251 press
SET until '2' shows on the display,
press '2' then '5' then '1' using the 1-8
buttons. Use the 'UP' & 'DOWN'
buttons or midi commands to quickly
step between Tones.
ARP MODE (Menu 2)
The buttons 7 & 8 are used to set the
ARP Mode & Range. Each press of
the '7' or '8' button will cycle through
the various options available.
The 'DYN' button is used to edit the
ARP clock division. To change the
ARP Step Timing press 'DYN',
change the value using the 'UP' &
'DOWN' buttons then press the 'DYN'
button again to exit this mode and
return to ARP MODE.
Details on the button use while in
ARP Mode are found in the ARP
section of the manual.
SEQ MODE (Menu 3)
The buttons '1-8' will load a sequence
from memory to the seq edit buffer.
SEQ ERASE
The BANK (SET) button is used to
Erase or Clear a sequence. While in
SEQ MODE press BANK followed by
the seq number '1-8' followed by a
long press of the WRITE button.
SEQ EDIT MODE
The buttons '1-5' are used to create
and edit a sequence. Details of
sequence edit button use are in the
Sequencer section of the manual.
DUMP MODE (Menu 4)
The '1-5' buttons are used to select a
dump type. The dump will not begin
until the 'WRITE' button is pressed.
PARAMETER EDIT MODE
The number buttons are used to
select the parameter to edit. e.g. the
number 112 will select the DCO1
Wave parameter. The parameter
numbers can be found on the edit
map and the parameter edit section of
the manual.
www.kiwitechnics.com Kiwi-30 Upgrade User Manual v121