SQUARE U-BOLT INSTRUCTIONS
Secure the L-Bracket to the Crossbars
1. Place supplied L-Bracket on top of your crossbars, with the vertical
end facing away from the vehicle.
2. Place Square U-Bolts on top of the L-Bracket with the mounting plate
under the crossbar.
Tip - The U-Bolt assembly should be 2.5cm apart.
Tip - Ensure vertical faces of L-Brackets are aligned before fully tightening.
3. Tighten each lock nut evenly while keeping L-Brackets level and
aligned.
Attach your awning to the L-Brackets
4. Slide four awning T-Bolts into awning channels, found on the back
side of the awning.
5. With a partner, hold Awning up to L-Bracket and align T-Bolt threads
with L-Bracket holes on vertical faces.
6. Insert T-Bolts through the L-Bracket holes and tighten the lock nuts
with a few turns, without fully tightening.
Tip - The Awning T-Bolts should still be able to move back and forth inside the
awning channel.
7. Ensure awning is centered between both crossbars, then fully tighten
all lock nuts to secure the awning.
Tip - It is recommended to take a short drive after attaching fixtures. Check on return to
see if any further tightening of brackets is necessary. Check fixtures regularly during use.
