background image

How to operate

How to operate

Use of Bathing Function

Common cautions

If you wish to use hot water of sufficient volume, press 

the 

Bathing

 button to select the bathing function.

If you leave the bathing function on for two and a half 

hours, the boiler returns to the function previously 

selected.

The pressure of the water feed should be 78 - 147 kPa 

(0.8 - 1.5 kgf/

). If the water pressure is higher than 

the proper pressure, install a reduction valve.

Hint for boiler operation

Cautions for use of bathing function

• Pay special attention not to scald yourself when using hot water

.

• When you open the tap after selecting the bathing function, hot water may be released.

Take particular care to protect children and elderly people from scalding water.

• When you use hot water for an extended period in the room heating mode, lukewarm water 

  may be supplied.   

• When you turn the power on and off while using the bathing function, the operation will be returned to 

  the previous mode of the bathing function.

W

ARNING

Use the power outlet exclusi

ve for the boiler, and be cautious for leakage

Never disassemble, repair or modify without approval of the manufacturer

Never touch the flue while you operate boiler

Do not place combustible or inflammable materials in the vicinity of the boiler

Cautions when using the bathing function

The operating power is AC 230/50Hz. Operate  the boiler only after checking  

the voltage.

Do not touch the power cable or operate the boiler with wet hands to avoid electric 

shock. Never clean the boiler with water as a leak, shock or failure of the boiler may 

result.

Install a fire extinguisher in the boiler room.

Do not stack wooden materials or place inflammable or combustible materials in 

the vicinity of the boiler, and keep the area surrounding the boiler clean.

Shock or fire may result.

Contact the after-sales service center when the boiler needs repairing.

You may get burnt.

Take care not to get burnt when using hot water.

Do not drink hot water.

Hot water may suddenly be released when you open the tap after setting the 

bathing function.
Take particular care to protect children and elderly people from scalding water.`

Danger

W

ARNING

W

ARNING

W

ARNING

W

ARNING

MUST DO

Содержание KRP-20A
















Отзывы: