Kiturami KRP-20A, Руководство пользователя

Страница: 5 / 15

How to operate How to operate
How to use Reservation function
Press the [ ] button until ‘Reservation’ is
displayed on the display.
(The operation lamp lights at the predetermined
time, and reserved operation starts.)
▶
Example: Operate the boiler for 20 minutes, shut
down operation of the boiler, and then operate
the boiler again for 20 minutes.
▶
How to change time for reserved start
Press the Reserve Set button.
When the reserved shutdown (min.) time
flashes, press the Up (▲)/Down (▼) button
to set the desired time (min).
▶
When you complete setting in this condition, the
reserved shutdown time operates first.
Hint for boiler operation
Hint for boiler operation
Press the Reservation Setting button.
When the reserved shutdown (min.) time
flashes, press the Up (▲)/Down (▼) button
to set the desired time (min.).
▶
When you complete setting in this condition, the
reserved shutdown time operates first.
Utilizing Reservation function
The Reservation function enables savings on fuel costs by operating the boiler for a specified number
of hours by setting the operation time and the shutdown time of the boiler.
(The operation time and the shutdown time will appropriately be adjusted dependent upon the season
and the insulation conditions of the houses.)
Press the [ ] button to display ‘ Outing ’.
(The Outing function is capable of maintaining the
room temperature at the minimal level, and of
preventing a rupture of the boiler.)
Function of preventing frozen rupture
The function for preventing a rupture of the boiler during freezing weather conditions maintains the
proper temperature of the boiler body, the floor heater pipes, and the pipes connected to the heating
pipe, thus preventing them from rupturing in freezing conditions. When you leave your home in the
winter season, you should leave the power cable of the boiler plugged in.
※ When you set the room temperature to 10 to 15 ℃ during an absence from home, you can prevent
the boiler from rupturing due to extremely low temperatures.
▶
The function of preventing a rupture in freezing weather does not operate in any of
the cases described below
-In the event of a power failure, or when the power cable of the boiler is not plugged in.
-In the event of poor insulation of the water feed pipes or exposed pipes.
How to use Outing function
If there is no specified time for arbitrary
operation, the boiler operates its function
independently of the settings.
▶
When you complete setting in this condition, the
reserved shutdown time operates first.
Press
Reservation
Setting button
and then set the
reservation time