Kiturami KRP-20A, Руководство пользователя

Страница: 2 / 15

Thank you for purchasing a KITURAMI boiler.
Please carefully
read and make sure you fully understand the user’s manual to ensure correct
operation and maintenance of the product, and keep the manual safe. If the
boiler operates abnormally or you have any questions about its functions, etc.,
please refer to the manual.
03 Structure and name
04 How to operate
12 Precautions for operation
14 How to clean/install
15 How to install
19 Specification for wood pellet boiler
20 Troubleshooting
24 Commissioning
Precautions for Safety
The user’s manual uses symbols to indicate that caution should be exercised to prevent accidents
caused by incorrect operation, or damage to the users and their properties. Please carefully read
and make sure you fully understand the symbols and their meanings to ensure correct operation of
the product.
The precautions are classified into three categories: “DANGER,” “WARNING” and “CAUTION.”
DANGER
WARNING
CAUTION
This symbol indicates hazardous situations where severe injury to or the death of the user may result.
This symbol indicates the possibility of severe injury to the user.
This symbol indicates the possibility of minor injury to the user or damage to the product
Structure and name
Cleaning port
Controller
Internal circulation pump
Hot water coil
Screw set
Burner
Ash tray drawer
Hopper lid
Fuel tank (hopper)
(200 kg)
Features
Accessories: Cleaning tools, user’s manual, cleaning brush, water draining tee, and room thermostat
Heat exchanger
High efficiency in Korea
-Certified for heating efficiency of 82% under the certification test of the Korea Environmental
Industry and Technology Institute (20K)
Application of multi-channel mode to prevent flame counter-flow
The apparatus incorporates the multi-channel mode to prevent flame counter-flow. The
burner fuel feed pipe is made of a special heat-resistant quarter pipe to allow easy
monitoring of flames in the burner.
Application of a control system and actual load apparatus
A blower of high DC voltage is used to reduce the quantity of sludge in the ash tray, thereby
extending the cleaning cycle. An actual load apparatus is used for the feed motor and the
heater, which triggers the safety shut-off device in the event of overload to prevent damage to
the machine.
Application of internal circulation pump exclusively for hot water supply
The internal circulation pump operates when supplying hot water in order to uniformly
distribute heat throughout the heat exchanger. This design enables the effective supply of hot
water