9
ENGLISH
Preparing the Food Processor for Use
Slicing and Shredding Disc Assembly
1. Place disc stem on the power shaft.
2. Fit the disc over the metal pin on the
disc stem with the raised-blade side up.
The disc has a raised nub on the top
and grooves underneath to help align it
properly. Rotate the disc until it falls fully
onto the stem.
Mini Bowl Assembly
1. Place the mini bowl inside the work
bowl over the power shaft. Rotate the
mini bowl until it falls into place. When
properly seated in the work bowl, the
mini bowl cannot be rotated.
2. Fit the mini blade on the power shaft.
It may be necessary to rotate the blade
until it falls into place.
3. To remove the mini bowl after
processing, lift the bowl using the two
finger grips located along the top edge
of the bowl.
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.