ENGLISH
USING THE STAND MIXER
|
11
USING THE STAND MIXER
DISASSEMBLING THE STAND MIXER
NOTE:
The pouring shield* can be
used to avoid ingredients splashing
out of the bowl when mixing as well
as to easily pour ingredients in the
bowl while mixing�
1
Raise the motor head:
Check to
be sure that the Stand Mixer is
unplugged, and the speed control is
turned to “0”; then, slide the locking
lever to the unlock position and lift
the motor head�
(
OPTIONAL)
Remove the pouring
shield*:
Lift the front of the pouring
shield clear of the rim of the bowl,
and pull away from the Stand Mixer�
2
Remove the accessory:
Press the
accessory upward as far as possible,
then turn the accessory clockwise
and pull it away from the beater
shaft�
3
Remove the bowl:
Gently turn
the bowl counterclockwise to release
it from the bowl clamping plate�
(OPTIONAL)
Pour ingredients into the
bowl through the pouring chute�
*Included with select models only�Also available as optional accessory
W11225091B.indb 11
5/10/2018 6:35:28 PM
