10
| USING THE STAND MIXER
USING THE STAND MIXER
OPERATING THE STAND MIXER
NOTE:
The Stand Mixer may warm up during use� Under heavy loads with extended
mixing time, the top of the unit may become hot� This is normal�
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
1
Plug the Stand Mixer into an earthed
3 prong outlet� Always set the speed
control lever on lowest speed to
start, then gradually increase speed
to avoid splashing ingredients� See
the “Speed control guide” to select
the best speed for your recipe�
2
Do not scrape the bowl while the
Stand Mixer is operating� The bowl
and beaters are designed to provide
thorough mixing without frequent
scraping� Scraping the bowl once
or twice during mixing is usually
sufficient�
NOTE:
To move the speed control lever
with ease, lift slightly up as you move it
across the settings in either direction�
W11225091B.indb 10
5/10/2018 6:35:27 PM
