14
15
Step7: After installation, there is side protection
on the side of the door.
Step 6: Rotate the baby car seat on forward
facing , pull the reclining button to adjust the
reclining position your desired.
Step 5: Extend the support leg tube in max
position till the the green color show in top
of support leg.
1 2 3 4
PRESS
PRESS
Step 1: Press and hold the central
regulator button while pulling the
shoulder strap outwards to relax
the shoulder strap.
Step 2: Press the red button to
open the buckle.
Step 3: Pull out the shoulder straps
and place them on both sides of
the seat.
Step 4: When i-size (40-105cm) is
used by children, please refer to
the above picture description for
the shoulder strap.
Step 5: Pull and adjust the safety belt
outward to make the shoulder belt
effectively restrain the children,and
reserve a certain space to prevent
the child seat belt from pressing the
children too much. The adult palm
can be inserted just between the safety
belt and the children's chest. It is better
not to be loose or tight, and ensure that
the pelvis area can be well restrained
when the belt is worn.Note: The bottom
of both sides of the shoulder shield
should be close to the same level and
pulled down to the bottom.
i-size (76-105cm) Child mounting method (forward)