12
13
bottom insert
size range
40-75CM
size range
＞75CM
Model: KX111
only for height less than or equal to 75cm
Step 6: How to use the buckle: put the buckle insert around and together, and then
insert the buckle slot at the same time. The sound of clicking indicates that the
buckle has been stuck.Then pull up the clip insert to check whether the clip is
properly locked.To unfasten the clasp, press the red button and the clasp insert
will pop out automatically.
Step 7: Pull the headrest handle upward to adjust the height of the headrest. Adjust the
height to the right position according to the different heights of the child.
After the baby is seated, adjust the
head to the right position (note: the
lowest part of the head is 1-2 fingers
away from the shoulder is the best).
Pull
一、I-SIZE(76-105cm)（
Forward facing
）
Attention
2.i-size universal (40-105cm): Support Leg+ five-point safety belt
Step 1.extend the support leg and installed
it till indicator show green color .
Step 2: Press the ISOFIX button at the bottom
of the seat forward and backward with your
hand, push the ISOFIX on both sides to the
maximum, press the end of the ISOFIX, and it
will not be retracted.
1.Suitable for models with ISOFIX systems which pass ECE R14 .
2.The i-size seat is installed forward, suitable for 76-105cm children. It has 4 adjustable
sitting positions, 1/2/3/4 gear respectively.
3.I-size seats cannot be installed in places with airbags.
4..“IMPORTANT-DO NOT USE FORWARD FACING BEFORE THE CHILD’S AGEEXCEEDS 15
months(Refer to instructions)”
5.Important - The seat should not be used laterally in the driving condition.
Step 4: Push the baby car seat to the back
of the car seat to make them fit tightly.
Shake the seat from side to side to make
sure it is effectively fixed.
Push
click
Step 3: Insert the ISOFIX of the baby car
seat into the corresponding ISOFIX fixed
point of the car, and a click will be heard
to display green in the display window.
It will display red in the window before
ISOFIX inserted correctly.
