8
9
Pull the rotation button one time by two finger ,meanwhile rotate main body till
heard "click" by another hand ,check the rotation indicator show green color .
一、Rotation function
Attention :the rotation function be Activated after the support leg full open.
Step 1.extend the support leg and installed
it till indicator show green color .
一、I-SIZE(40-105cm)（
rearward facing
）
1.Suitable for models with ISOFIX systems which pass ECE R14 .
2.This I-size seat is installed backward, suitable for 40-105cm children. Only one seat can be
adjusted in the five position.
3.i-size seats cannot be installed in places with airbags.
4.“IMPORTANT-DO NOT USE FORWARD FACING BEFORE THE CHILD’S AGEEXCEEDS 15
months(Refer to instructions)”
5.Important - The seat should not be used laterally in the driving condition.
Attention
1.i-size universal (40-105cm): Support Leg+ five-point safety belt
Step 4: Push the baby car seat to the back
of the car seat to make them fit tightly.
Shake the seat from side to side to make
sure it is effectively fixed.
Step 2: Press the ISOFIX button at the bottom
of the seat forward and backward with your
hand, push the ISOFIX on both sides to the
maximum, press the end of the ISOFIX, and it
will not be retracted.
Push
click
Step 3: Insert the ISOFIX of the baby car seat
into the corresponding ISOFIX fixed point of
the car, and a click will be heard to display
green in the display window.It will display red
in the window before ISOFIX inserted correctly.