18
19
Step 6: After installation, there is side protection
on the side of the door.
Step 1 :withdraw support leg into storage
of base .
一、I-SIZE(100-150cm)（Forward facing ）
Step 4: Push the baby car seat to the back
of the car seat to make them fit tightly.
Shake the seat from side to side to make
sure it is effectively fixed.
Step 2: Press the ISOFIX button at the bottom
of the seat forward and backward with your
hand, push the ISOFIX on both sides to the
maximum, press the end of the ISOFIX, and it
will not be retracted.
Step 3: Insert the ISOFIX of the baby car
seat into the corresponding ISOFIX fixed
point of the car, and a click will be heard
to display green in the display window.It
will display red in the window before
ISOFIX inserted correctly.
i-size universal(100-150cm): Option 1: ISOFIX attaThree-point car seat belt
Option 2: Three-point car seat belt
1.This ECRS seat is installed forward and suitable for children with height of 100-150cm. It has 1
adjustable sitting positions, 4 gear respectively.
2. Hide the five-point safety belt and pad before using the ECRS seat.
3. Suitable for models with ISOFIX systems which pass ECE R14 and with three-point seat belt/
seat belt with a retractor which pass ECE R16.
4.Don t use force-bearing points without marking.
Attention
click
bottom view
Push
Step 5: adjust the baby car seat on forward
facing , available to child's size 100-150cm ,
recline position 4 is available .
1 2 3 4
click
Don t use force-bearing points without marking
Step 7: put a child in baby car seat, adjust headrest to the right position, place the
upper end of the car seat belt diagonally through the guide hook slot at the bottom
of the head,the lower end of the diagonal band passes through the corresponding
guide mark,the cross band passes through two left and right guide barbs, finally, the
car latch is attached to the car buckle,when you hear "click," it means to lock correctly,
the pelvis should be properly restrained when the belt is worn.
Don't use support leg when use adult safety belt