KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-400D
: +91.80. 22178200
Page 29 of 56
Cause
Remedy
3.
Failure of injector
Adjust pressure or clean up carbon deposit,
grind or replace parts
4.
Injector doesn’t work or bad fuel
supply of oil pump
Fasten type T bolt of oil supply pipe,
evacuate air in the pipe.
C.
Insufficient compression force
1.
Nuts of cylinder head is loosened
or cylinder gasket is damaged
Fasten nuts or replace gasket
2.
Piston ring, piston, or cylinder
liner is worn out.
Repair or replace the part whichever is
necessary.
3.
Piston ring is banded or broken
Clean or replace the piston ring
4.
Bad sealing of throttle and
throttle seat causes gas leakage.
Grind throttle.
5.
Improper clearance of air intake
and exhaust valve.
Adjust as per relevant requirements
6.
Throttle stem is seized in duct
Remove throttle and clean it
7.
Too much drop of compression
ratio even after adjusting throttle
seat several times.
Replace throttle seat.
D.
Improper oil supply advance angle
Adjust as per relevant requirements
E.
Viscosity of engine oil is too large
Fill engine oil of right type and right grade.
Insufficient Engine Power:
Cause
Remedy
A.
Failure of oil passage system
1.
Oil passage is blocked,
unsmooth oil supply
Check the oil passage
2.
Bad oil supply of injection pump
Repair or replace the necessary parts
3.
Failure of injector
Refer to “difficulty in starting”
B.
Insufficient compression force
Refer to “difficulty in starting
C.
Air filler is blocked
Clean or replace filter element
D.
Rotary speed is too low
Throttle up
E.
Improper oil supply advance angle
Adjust as per the requirements
F.
Improper clearance of air intake and
exhaust valve.
Adjust as per the requirements
G. Parts of injection pump or injector is
worn out or injection pressure is
insufficient
Replace parts and adjust injection
pressure.
Unstable working or discontinuous eruption noise
