KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-400D
: +91.80. 22178200
Page 28 of 56
Symptom
Cause
Remedy
Leakage
of
the
Traveling box body
The Traveling box body has
tiny hidden holes
Re-welding or brush base paint
to stop the leaking
Troubleshooting Bevel Gears Mesh:
When the abnormal transmission of mesh of bevel gear of sound is confirmed, stop the machine
and check as follows:
1. Clearance adjustment of mesh of angel gear in
gear-box ( See Figure 10)
a)
When lateral clearance of mesh of the gear
△
＜
0.05mm, we should put some vulcanized
paper to enlarge the clearance between the
gear-box and the traveling box.
b)
When lateral clearance of mesh of the gear
△
＞
0.3mm,we should reduce the clearance to
0.05-0.10 mm between the bearings and gear
Ⅱ
shaft
2. Clearance adjustment of mesh of the gear in the
running case.(See Figure 11)
a)
When lateral clearance of mesh of the gear
△
＜
0.05mm, we should increase adjustment
pad
Ⅰ
by 0.2-0.3mm to enlarge the clearance,
and change vulcanized paper board
Ⅱ
and
adjustment pad. To ensure the axial clearance
of the gear is 0.05-0.15mm.
b)
When lateral clearance of mesh of the gear
△
＞
0.3mm, we should reduce adjustment pad
Ⅰ
, meanwhile the axial clearance of gear
Ⅱ
is 0.05-0.15mm,or increase the adjustment
pad
Ⅱ
, meanwhile ensure the axial clearance
of gear
Ⅰ
is 0.05-0.15mm.
Engine Troubleshooting:
Difficulty in starting or failure to start
:
Cause
Remedy
A.
Extremely cold weather
Pour in 3-5g engine oil in air intake pipe or
spray hot water at the top of the cylinder
head.
B.
Failure of fuel system
1.
Fuel is frozen
Replace the fuel, apply proper fuel type.
2.
Water in fuel
Clean oil tank and replace fuel
