KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-400D
: +91.80. 22178200
Page 16 of 56
3.
When ditching is needed
: Unlade the Deep Furrowing Resistance
Stick, fix the ditcher, adjust width & height of the ditcher, and then
ditching can be conducted.
•
Width scope of ditching : 14cm-40cm
•
Depth scope of ditching: 11cm-25cm
4.
Short distance transport
: Fix forearm of the wagon box on the trailer and wheels on
the transmission shaft of the running part, the machine can do a transportation job. The
rated load is 250kg, under normal rotated speed of the diesel engine, speed of the fast
shift is about 10 km/h and that of the slow shift is about 5km/h.
5.
Multi-functional working:
Knock down protection
over of the gear-box (No.2 in Figure 1), unscrew
the bolts away from the rear part of the main shaft,
and take the cover for keys out of the shaft. Fasten
the self-contained belt pulley or coupling onto the
gear-
box’s main shaft’s rear part with screws. Type
A of common V belt is adopted for belt pulley’s
cross section. Rated rpm of the belt pulley is 3000
rpm. When the corresponding devices are
equipped, pumping water, spraying, threshing,
reaping, generating electricity, etc. are realized.
Hookup, Electric Starter:
Preparation
:
1.
The safety protection guard must be attached to the machine before using.
2.
Check that the blade and fender are correctly assembled and securely fastened.
3.
While working, always wear substantial footwear and long trousers. Do not operate
the equipment barefoot or wearing open sandals.
4.
Thoroughly inspect the area where the equipment is to be used and remove all
objects which can be thrown out by the machine.
5.
WARNING
-Diesel is highly flammable:
a.
Store fuel in containers specifically designed for this purpose
b.
Refuel outdoor only and do not smoke while refueling.
c.
Add fuel before starting the engine. Never remove the cap of the fuel tank or
add diesel while the engine is running or when the engine is hot.
d.
If diesel is spilled, do not attempt to start the engine but move the machine away
from the area of spillage and avoid creating any source of ignition until diesel
vapors have dissipated.
e.
Replace all fuel tank and container caps securely
6.
Replace faulty silencers
7.
Before using, always visually inspect to see that tools are not worn or damaged.
Replace worn or damaged elements and bolts in sets to preserve balance.
