KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-400D
: +91.80. 22178200
Page 13 of 56
5.
Unscrew the tie rod, grasp and loosen the clutch handle until the spring force in the
clutch can reset the handle, then screw the locknut.
Figure 5
Figure 6
Adjustment of the reversing gear cable:
(See Figure 5 and 6)
1.
Unscrew the locknut of the tie rod.
2.
Spin the tie rod clockwise until the bare handle support is the shortest.
3.
Get the cable into the reversing fork shaft besides the gear-box, and ensure the joint
of cable goes into the hole of the fork shaft.
4.
Properly pull the reversing fork shaft counterclockwise, get the cable into the narrow
gap of the reversing wire socket besides the gear-box, and ensure the pipe head
goes into the hole of the wire socket.
5.
Unscrew the tie rod, grasp and loosen the clutch handle until the spring force in the
clutch can reset the handle, then screw the locknut.
