KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-300D / 307D / 350D / 357D
KK-CRT-550D
: +91.80. 6835 7800
Page 18 of 80
Figure 6
Adjustment of the reversing gear cable:
(See Figure 5 and 6)
1.
Unscrew the locknut of the tie rod.
2.
Spin the tie rod clockwise until the bare handle support is the shortest.
3.
Get the cable into the reversing fork shaft besides the gear-box, and ensure the
joint of cable goes into the hole of the fork shaft.
4.
Properly pull the reversing fork shaft counterclockwise, get the cable into the
narrow gap of the reversing wire socket besides the gear-box, and ensure the
pipe head goes into the hole of the wire socket.
5.
Unscrew the tie rod, grasp and loosen the clutch handle until the spring force in
the clutch can reset the handle, then screw the locknut.