Kipor SINEMASTER IG4300, Руководство пользователя

Страница: 35 / 50

29
1. Remove the generator rear cover to access the spark arrestor.
2. Remove the spark arrestor from the muffler by unscrewing the clamp.
3. Clean the spark arrestor with a stiff wire brush.
4. Replace if the wire mesh is perforated or torn.
5. Reinstall the spark arrester.
6. Reinstall rear cover.
■
If the generator has been running, the muffler will be very hot. Allow it
to cool before proceeding.
■ The spark arrester must be serviced every 100 hours to maintain its
efficiency.
■
Inspect the spark arrester screen for holes or tears. Replace as
necessary.
7. TRANSPORTING/STORAGE
8.1 Transporting
When transporting the generator, turn the fuel valve lever OFF and keep the generator level to prevent
fluid spillage. Fuel vapors or spilled fuel may ignite. Transporting the generator with gasoline in the fuel
tank is prohibited.
8.2 Extended Storage:
1. Be sure the storage area is free of excessive humidity and dust.
2. Drain the fuel.
a. Open the left side maintenance cover.
b. Turn fuel valve lever to ON and then loosen the carburetor
drain screw. Drain the gasoline from the carburetor and fuel tank
into a suitable container.
c. Tighten the carburetor screw, close the fuel valve lever and left side maintenance cover.
3. Once a month, recharge the battery.
4. Change the engine oil.
Drain
plug
g