Kioti DS4110 Скачать руководство пользователя страница 56

Страница: 56 / 177

ds4110(hs) / ds4510(hs)

this lamp comes on when the en-

gine oil pressure or oil level is low.
this lamp is turned on when the

starting switch is turned on before

starting the engine but turned off af-

ter starting the engine. if this lamp

comes on while driving, stop the en-

gine immediately and check the en-

gine oil level.
if this lamp comes on even with the

specified engine oil level, have the

tractor checked by your local

kIOTI

dealer or workshop immediately.

ENGINE OIl PRESSuRE

wARNING lAMP



If the oil level is below the

specified range, the engine

can seize.



The engine can be severely

damaged if driving or operat-

ing the tractor with the engine

oil warning lamp ON.

bATTERY ChARGING lAMP

this lamp is turned on when the

starting switch is turned on before

starting the engine but turned off af-

ter starting the engine.



If this warning lamp comes

on while driving, the charging

system, such as the alternator,

is malfunctioning. Therefore,

turn off all electrical devices

and have the tractor checked

by your local kIOTI Dealer or

workshop as soon as possible.

CAUTION

H61O411A

H61O412A

M50-EU-04.indd 12

2009-10-08 오전 8:46:26

Содержание DS4110


















































































































































































Результаты поиска

Содержание DS4110

Отзывы:

Kioti DS4110, Руководство пользователя, Страница: 56 / 177

Результаты поиска

Содержание DS4110

Отзывы: