Kioti DS4110 Скачать руководство пользователя страница 132

Страница: 132 / 177

-1

MainTenance

H61O708A

(1) radiator screen (a) Detach

ClEANINg gRIll, RADIATOR

sCREEN (g)

1. check front grill and side screens

to be sure they are clean of de-

bris.

2. lift out the radiator screen and re-

move all the foreign material.



Bonnet grill and screen must

be clean from debris to pre

vent engine from overheating

and to allow good air intake for

the air cleaner.

1. The brake and clutch pedals

should be inspected for free trav-

el, and smooth operation.

2. you should adjust these pedals

if an incorrect measurement is

found. (see maintenance code “o”

and “r” in this chapter).

ChECkINg BRAkE AND

ClUTCh PEDAls (h)

To avoid accidents:



Be sure to stop the engine be

fore removing the screen.

CAUTION

IMPORTANT



when depressing the brake ped-

als separated, both of the brake

pedals should be moved down to

the same depth.

NOTE

M50-EU-07.indd 13

2009-09-28 오후 6:11:28

Содержание DS4110


















































































































































































Результаты поиска

Содержание DS4110

Отзывы:

Kioti DS4110, Руководство пользователя, Страница: 132 / 177

Результаты поиска

Содержание DS4110

Отзывы: