background image

1

-

1

safetY precautions

1

-

1

ds4110(hs) / ds4510(hs)

1

-

1

safetY precautions

1

-

1

ds4110(hs) / ds4510(hs)

1

decals

 (2)  part no. : t4180-52161

 (4)  part no. : t2325-50743

 (5)  part no. : t4625-53191

 (6)  part no. : t2241-50702

 (1)  part no. : t2615-54112

avvertenZa

avvertenZa

 (3)  part no. : t2615-53061

1. Before leaving the tractor, park the tractor on lev-
   el ground, apply the parking brake, disengage the
   P.T.O. and stop the engine.
2.Avoid accidental contact with the gear shift levers
   while the engine is running as unexpected tractor
   movement can result. 

T4625-53191

to avoid possiBle inJurY or death

1.

2.

do not start engine by shorting across starter terminals.

machine may start in gear and move if normal starting 

circuitry is bypassed.

start engine only from operator’s seat with transmission 

and pto in neutral.

never start engine while standing on ground.

t2241-50702

M50-EU-01.indd   17

2009-09-17   오후 1:16:43

Содержание DS4110


















































































































































































Отзывы: