Kinze 3600, Руководство оператора

Страница: 13 / 382

Safe and careful operation of the tractor and planter
at all times will contribute significantly to the prevention
of accidents.
Since a large portion of farm accidents occur as a result
of fatigue or carelessness, safety practices should
be of utmost concern. Read and understand the
instructions provided in this manual and on the warning
signs. Review these instructions frequently! Listed
below are other safety suggestions that should become
common practice.
Never allow the planter to be operated by
anyone who is unfamiliar with the operation
of all functions of the unit. All operators
should read and thoroughly understand
the instructions given in this manual prior
to moving the unit.
Never permit any persons other than the
operator to ride on the tractor.
Never ride on the planter or allow others to
do so.
Always make sure there are no persons
near the planter when row marker assemblies
are in operation or when rotating the planter.
Always keep hands, feet and clothing away
from moving parts. Do not wear loose-
fitting clothing which may catch in moving
parts.
Always wear protective clothing,
substantial shoes and suitable hearing and
eye sight protectors applicable for the
situation.
Do not allow anyone to stand between the
tongue or hitch and the towing vehicle
when backing up to the planter.
Be aware of bystanders, particularly
children! Always look around to make sure
it is safe to start the engine of the towing
vehicle or move the planter. This is
particularly important with higher noise
levels and quiet cabs, as you may not hear
people shouting.
4-1 Rev. 3/05
SAFETY PRECAUTIONS
Use a tractor equipped with a roll-over-
protective-system and fasten your seat belt
prior to starting the engine.
Before operating the planter for the first time
and periodically thereafter, check to be sure
the lug nuts on the transport wheels are
tight. This is especially important if the
planter is to be transported for a long
distance.
Never work under the planter while in raised
position without using manual safety lockup
device.
Install safety lockup devices on row markers
prior to transporting the planter or working
around the unit.
Watch for obstructions such as wires, tree
limbs, etc., when folding row markers.
To avoid serious injury or death, care must
be taken when operating row markers around
overhead power lines.
On machines where the outer transport wheel
on the left side of the planter is bolt-on to
allow legal width truck shipment, always
install outer transport wheel assembly prior
to unloading. DO NOT REMOVE THIS
ASSEMBLY AFTER PLANTER IS
ASSEMBLED FOR USE. DO NOT fold planter
or tow planter while the outer transport
wheel is removed. Tipping may occur
because of narrow wheel base.
This planter is designed to be DRIVEN BY
GROUND TIRES ONLY. The use of hydraulic,
electric or PTO drives may create serious
safety hazards to you and the people nearby.
If you install such drives you must follow all
appropriate safety standards and practices
to protect you and others near this planter
from injury.
D060299127a