Kinze 3600, Руководство оператора

Страница: 54 / 382

MACHINE OPERATION
6-26 Rev. 7/04
FIELD AREA/TOTAL AREA
Each AREA FIELD/TOTAL key press alternates
between field area and total area.
Field area displays the total number of acres or hectares
using a 6 digit, one decimal place format.
NOTE: When FIELD AREA is selected, the UP or
DOWN key must be held in slightly longer than
normal so the monitor will not mistake this action
with a CLEAR, which consists of the UP and DOWN
arrow keys pressed simultaneously. A beep will
sound when the function activates.
Total area displays the total number of acres or hectares
using a 6 digit, one decimal place format. The total area
counter updates every time the field area counter
increments. Clearing the total area counter will also
clear the field area counter.
When the monitor is programmed as a rear only or
rear/front configuration and shaft rotation sensors
are installed, pressing the UP arrow to move beyond
row spacing lights an arrow on an unlabeled area
above ROW SPACING. This is the automatically set
division line between the L.H. shaft sensor and the
R.H. shaft sensor. The display shows the first row on
the rear section and the front section assigned to the
R.H. shaft rotation sensor.
EXAMPLE: On a 12 Row 30" planter with Interplant ®
Package, the display would appear as follows:
092597-21
THIS DISPLAY IS NOT ACCESSIBLE ON LEFT/
RIGHT CONFIGURATIONS OR SYSTEMS
WITHOUT SHAFT ROTATION SENSORS.
SEED POPULATION/SEED SPACING
Each SEED POP/SPACING key press alternates
between seed population and seed spacing.
Seed population displays the average number of seeds
or the row average number of seeds per acre or seeds
per hectare for all the active rows. The average is
displayed using a 6 digits, no decimal places format.
The AVERAGE POPULATION icon will turn on. When
in the scan mode, the scan arrow and SCAN ROW
POPULATION will appear. The ROW number icon and
the current row will be displayed on the left and the
population will be displayed on the right in 1000’s using
3 digits, one decimal place (e.g. 32.9 means 32,900).
When in scan freeze mode, the scan arrow and ROW
POPULATION will turn on (scan arrow may be flashing).
The UP and DOWN keys may be used to lock on the
desired row.
Seed spacing displays the average distance or the row
average distance between seeds for all active rows in
inches per seed or centimeters per seed using a 3 digit,
one decimal place format. When the average is
displayed the AVERAGE SPACING icons are turned
on. When in the scan mode, the scan arrow and SCAN
ROW SPACING icons will appear. The ROW number
icon and the current row will be displayed on the left and
the spacing will be displayed on the right. The display
will sequence to the next row every 5 seconds. When
in scan freeze mode, the scan arrow and SPACING will
turn on (scan arrow may be flashing). The UP and
DOWN keys may be used to lock on the desired row.
KPM II
Rev. 3/05