manualshive.com logo in svg

Kinova JACO, Руководство пользователя

Поделиться
Скачать
Kinova JACO Скачать руководство пользователя страница 50

Jaco® assistive robot User guide

46

 Cleaning, maintenance, and disposal

This section describes maintenance and disposal considerations.

Note: 

 Do not reuse the product unless it has been re-installed by a certified technician.

Cleaning instructions

Only the external surfaces of the product may be cleaned. This is done using a damp cloth and a mild
detergent. The following describes the steps for cleaning the product:

• Prepare a water/soap solution using about 2 ml of dish soap for 100 ml of water
• Immerse a clean cotton cloth in the solution
• Remove the cloth and wring out thoroughly
• Gently rub the external surface to be cleaned

 Do not wash more than three times per day.

 Do not immerse any part of the product under water or snow.

 The product is not intended to be sterile. No sterilization process should be undertaken with

the product.

 Do not rub the external surfaces with abrasive materials.

Cleaning instructions of the Lift arm

• To clean the lift arm, it is best to use a lightly moistened cloth (without dripping) to clean the

outer case.

• Internal components such as the motor or the mechanism may only be cleaned by Kinova

personnel.

• If you notice any heavy contamination here, please contact Kinova directly.

The lifting arm should not be submerged in water or other liquids.

Preventive Maintenance of the robot

Clean and lubricate fingers every six months.

 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, for example if the power-supply cord or plug is damaged, if the product
does not operate normally or if it has been dropped.

 The product has no user serviceable parts. Do not open.

Disposal of the robot

 The product contains parts that are deemed to be hazardous waste at the end of useful

product life. For further information on recycling, contact your local recycling authority or Kinova
distributor. In any case, always dispose of product via a recognized agent.

+1 514-277-3777 

kinovarobotics.com

© 2021 Kinova inc. All rights reserved.

Содержание JACO






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды