manualshive.com logo in svg

Kinova JACO, Руководство пользователя

Поделиться
Скачать
Kinova JACO Скачать руководство пользователя страница 5

Jaco® assistive robot User guide

1

 Disclaimer

Kinova

®

, Kinova OLED display, and the Kinova logo are trademarks of Kinova inc., herein referred

to as Kinova. All other brand and product names are trademarks or registered trademarks of their
respective corporations.

The mention of any product does not constitute an endorsement by Kinova. This manual is
furnished under a lease agreement and may only be copied or used within accordance with the
terms of such lease agreement. Except as permitted by such lease agreement, no part of this
publication may be reproduced, stored in any retrieval system, or transmitted, in any form or by any
means, electronic, mechanical, recording, or otherwise, without prior written consent of Kinova.

The content of this manual is furnished for informational use only, is subject to change without
notice, and should not be construed as a commitment by Kinova. Kinova assumes no responsibility
or liability for any errors or inaccuracies that may appear in this document.

Changes are periodically made to the information herein; these changes will be incorporated into
new editions of this publication. Kinova may make improvements and/or changes in the products
and/or software programs described in this publication at any time.

Address any questions or comments concerning this document, the information it contains or the
product it describes through the Kinova website support page:

www.kinovarobotics.com/support

Kinova may use or distribute whatever information you supply in any way it believes appropriate
without incurring any obligations to you.

+1 514-277-3777 

kinovarobotics.com

© 2021 Kinova inc. All rights reserved.

Содержание JACO






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды