Kingsom KS-200DH, Руководство по эксплуатации и обслуживанию

Страница: 9 / 31

temperature will drop 1℃ and the display window will display the set
temperature. When loose the
“▼” knob, the display window will delay
the set temperature about 2 seconds. If 2 seconds later, press the
“▼” knob again, the setting temperature will drop 1℃ again. If
press the “▼” knob and not loose at least 1 second, the setting
temperature will drop rapidly. Till the needed temperature reaches,
then loose the
“▼” knob.
Parameters
The station has the following parameters. Parameters setting can
be adjusted:
Setting the password.
The initial password in station ’ s memory is “000”. The setting
temperature is admitted in this state. If need to restrict the setting
temperature, the password must be changed.
Enter into setting the
password
Input Previously
Password
1.Turn off the power switch.
Press and hold the
“
▲”and“▼
buttons simultaneously, then
turn on the power switch.
2.Continue holding down the
“
▲”and“▼”button until the
display shows .
3.When the display shows
, the station is in par-
ameter-input mode.
4. Press the
“ * ” button, the
display shows
,
and
the left-most digit (the 100’s
digit) in the display will flash.
This indicates the station is in
password setting mode and
the 100’s digit can be a
djusted.