Kingsom KS-200DH, Руководство по эксплуатации и обслуживанию

Страница: 21 / 31

Error Messages
Various error messages will be display when there is a problem with
the unit. If the following message is displayed, see the trouble
shooting guide.
Sensor Error
Note
Heater Error
If there is a possibility of a
failure in the sensor or
anywhere in the sensor circuit,
will be displayed and
power to the soldering
iron will be cut off.
If power is being sent to solder-
ing iron and the tip temperature
goes below the setting temper-
ature about 80
℃
, the
temperature display will flash.
Draw your attention to this.
If power can’t be sent to
soldering iron, the display
window will show
. This indicates the
possibility of a heater
malfunction.
Trouble shooting Guide
!
WARNING:
* Disconnect the power plug before servicing.
Failure to do so may result in electric shock.
* If the power cord is damaged, it must be re-
placed by the manufacturer, its service agent
or similarity qualified person in order to avoid
personal injury or damage to the unit.
S - E
S - E
Flash the Temperature Display
H - E
H - E