Kingsom KS-200DH, Руководство по эксплуатации и обслуживанию

Страница: 7 / 31

Example: 400℃ to 350℃
1.
2.
3.
4.
1. Push the “*” button and the
Hold it down for at least one
second. The left-most digit
(the 100 ’ s digit ) in the
display will flash. This
indicates that the station is
in temperature setting mode
and that the 100’s digit can
be adjusted.
2. Select the desired value for
100’s digit.
Using the “
▲”or“▼” button
will change displayed value
as follows.
… 2 3 4…
Press the “*” button when the
desired value is displayed.
This will cause the middle
digit (the 10 ’ s digit) in the
display to begin flashing.
3. Select the desired value for
the 10’s digit.
Using the “ ▲”or“▼” button
will change displayed value
as shown below.
1 2
t
3
t
4
t
5
t
6
t
7
t
8
t
9
t
0
Press the “*” button.
The right (the 1’s digit) will
then begin flashing to indicate
that the 1’s digit can be set.
4. Select the desired value for
the 1’s digit.
Using the “ ▲”or“▼” button
will change displayed value
as shown above for the 10’s