Kingsman ZCVRB47, Руководство по установке

Страница: 19 / 85

ZCVRB47 -Vented Chase –Removal of Ventilation Plates-
See Framing for Vented Chase
⚠
CAUTION: Ventilation Plates must be removed before ZCVRB47 is installed into a Vented Chase.
STEP 1: Remove [Qty 2] Outer Top Covers.
STEP 2: Remove [Qty 2] Ventilation Plates inside opening.
Kingsman Enclosure Grills – Serene Series Fireplaces – ZCVRB47 & ZCVRB60
Serene Series Units are designed to work with specific Kingsman Enclosure Grills when installed into a Vented Chase:

ZCVRB47 works with the V46EG Enclosure Grill or VL60EGS Enclosure Grills.

ZCVRB60 works with the VL60EG Enclosure Grill or VL60EGS Enclosure Grills.
If desired, some other Kingsman Enclosure Grills can also be used. Refer to the chart below.
- GRILLS -
VL60EGS
220 Sq. In.
Total
Set of 2 Grills
VL72EGS
285 Sq. In.
Total
Set of 2
Grills
V46EG
122 Sq. In.
VL48EG
176 Sq. In.
VL60EG
220 Sq. In.
VL72EG
285 Sq. In.
Required Opening:
6-5/8” x 15-1/4”
Each
9” x 15-1/4”
Each
2-5/8” x 46-3/4 3-5/8” x 48-5/8” 3-5/8” x 60-5/8” 3-5/8” x 78-5/8”
FIREPLACES
ZCVRB47
IN
MANUAL
✔
IN
MANUAL
✔ ✔ ✔
ZCVRB60
IN
MANUAL
✔
NA NA
IN
MANUAL
✔
STEP 1: Remove [Qty 2] Outer
Top Covers
STEP 2: Remove [Qty 2] Ventilation Plates.
Remove 1/4” drive screws and pry loose
from sealant.
TOP VIEW After Outer Top Covers and
Ventilation Plates have been removed.
See Vented Chase Framing
Section
✔ = GRILL CAN BE USED
NA = NOT APPLICABLE
19