17
17
LOG INSTALLATION - VLOG30/VSB24
Step 2
Step 1
Step 4
Step 5
Step 3
Place crossover logs #4 and #5 on top as shown.
Place crossover logs #6, #7 and #8 on top as shown.
Place silica sand (NG only) or 1/4” small rock (LP only)
inside and in front of burner pan. Place 1” large rock in-
side, in front, and around the sides of the pan. Place
rock wool in front of center log support as shown.
Sprinkle vermiculite over top of lava rock and rock
wool.
Place rear log #1 on rear log support. Place front logs
#2 and #3 on front and center log support as shown.
This log set has the option to be reversed from a split look to a bark look or vice versa by turning the front logs and
crossover logs.
Rear log #1 is not reversible.
