SAFETY INFORMATION
WARNINGS Cont.
16. Isolate the appliance from the gas supply piping system by closing its individual manual shut off valve during any
pressure testing of the the gas supply piping system at test pressure equal or less than 1/2 psig.
17. Do not use any type of after-market blower that fits inside the fireplace. Drafts created by these type of blowers may
cause sooting. Only use original equipment supplied with appliance.
18. Turn off appliance and let cool before servicing. Only a qualified service person should install, service and repair
appliance.
19. Inspect the appliance before use and at least annually by a professional service person. Frequent cleaning may be required
due to excessive lint from carpeting, bedding material, etc. It is important that control compartment, burner and
circulating air passage of the appliance be kept open.
20. When operated for the first time, there will be some smell from the appliance. This will diminish and disappear after a
few hours of operation.
21. Installation and the provisions for combustion and ventilation air must conform with the National Fuel Gas Code, ANSI
Z223.1/NFPA 54, or the CSA B149.1, Natural Gas and Propane Installation.
22. Must be installed by a licensed gasfitter in the Commonwealth of Massachusetts. Complies to code 527CMR.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02260
5
WARNING
Glass doors must be open when burner is lighted, as this
can affect combustion and overheating of the main
valve control.
