Kingsman OB24MAN, Руководство пользователя

Страница: 41 / 54

Safety Information and Manual Lighting Instructions
FOR YOUR SAFETY READ BEFORE LIGHTING
⚠
WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage,
personal injury or loss of life.
A.
This appliance must be lit by hand. When lighting,
follow these instructions exactly.
B. Before LIGHTING, smell all around the appliance
area for gas. Be sure to smell next to the floor,
because some gas is heavier than air and will settle
on the floor.
C.
Use only your hand to turn the gas control knob or
valve. Never use tools. If the valve will not turn by
hand, don’t try to repair it, call a qualified service
technician. Force or attempted repair may result in a
fire or explosion.
D. Do not use this appliance if any part has been
underwater. Immediately call a qualified service
technician to inspect the appliance, and to replace any
part which has been underwater.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electric switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
• If you cannot reach your gas supplier, call the fire department.
Manual Lighting Instructions
1. STOP! Read the safety information above.
2. Remove the top cover.
3. Find the manual gas control valve.
4. Place a burning match on top of burner in the
middle where ports are present. DO NOT HOLD
THE MATCH IN HAND. For Natural Gas unit
turn on the on/off valve slowly at the unit. For LP
unit turn the valve on the LP tank
counterclockwise all the way and then turn on
the on/off valve slowly at the unit.
5. If the burner does not light before the match
goes out, immediately turn the gas to off.
6. Wait at least five (5) minutes to clear out any
gas. If you have unsuccessfully tried to light the
burner, wait longer. Then smell for gas, including
near the floor. If you smell gas, STOP! Follow
“B” in the safety information above. If you don’t
smell gas, repeat step 4.
Push Button Ignition (if equipped)
1. STOP! Read the safety information above.
2. Remove the top cover.
3. Find the manual gas control valve and push
button igniter.
4. Push and hold the button on the igniter and
ensure sparking is occurring at the probes inside
the burner tray.
5. Turn ON gas supply and manual key valve.
6. Gas should ignite within 10 seconds or less. If
the burner does not light turn the gas to off.
7. Wait at least five (5) minutes to clear out any
gas. Then smell for gas, including near the floor.
If you smell gas, STOP!
8. If you don’t smell gas, repeat step 4.
To Turn Off Gas Appliance
1. Turn the on/off valve to the off position at the
unit for natural gas unit. For LP unit, turn the
on/off valve to the off position at the unit and
then turn the valve on the LP tank to the off
position clockwise.
2.
Replace the top cover.
41