Kingsman marquis ZCV39LPE2, Руководство по установке

Страница: 88 / 95

Power Vent Parts List – 4/7 Venting
NUMBER DESCRIPTION
PVH58
Horizontal Power Vent Starter Kit
‐
Exterior Mount
PVH58FM Horizontal Power Vent Kit
‐
Flush Mount
Note:
Must use a one foot section of 5/8 DV hard pipe to connect to the Power Vent Termination (not supplied)
CHOOSE CONTROL MODULE OR HARNESS DEPENDENT ON VALVE SYSTEM
PVC58MV Power Vent Control Module
‐
for Millivolt Models
PVC58IPI Power Vent Control Module
‐
for Proflame 1
‐
IPI Models
584
‐
X12 Harness for Proflame 2 IPI
‐
Deluxe Models
PVH20H Main Wiring Harness Assembly – Extension Harness (20ft)
CHOOSE VENTING TO BE USED: SECTION 1
‐
HARD PIPE, SECTION 2 FLEX VENT
SECTION 1 DIRECT VENT HARD PIPE 4x6-5/8" – for entire installation
(Two Adapters needed: one at Flue and one at Termination)
Flue of Fireplace
ZDVDKA Duravent Adapter – for Flat Flue
ZDVDFA Duravent Adapter – for Sloped Flue
Termination End
ZDVDIA Duravent Hard Pipe Adapter- (used to connect 4x6-/8" to 5/8 Hard Pipe)
Note: Must use a one-foot section of 5/8 DV hard pipe (not supplied) to connect to the Power Vent Termination.
SECTION 2 FLEX VENT - Used for entire installation – order Z47PVA
Note: Must use a one-foot section of 5/8 DV hard pipe connected to the power vent on all installations.
Termination End
Z47PVA Flex Pipe Adapter Kit - (to adapt flex pipe to power vent to hard pipe)
Note: Must use a one-foot section of 5/8 DV hard pipe (not supplied) to connect to the Power Vent Termination.
FLEX VENTING KITS
ZDVFK5 Flex Kit (4” & 7” Dia.) x 2.5’ (Unexpanded) 5’ Expanded
ZDVFK8 Flex Kit (4" & 7" Dia.) x 8' (c/w Springs, Screws, Mill Pac)
ZDVFK20 Flex Kit (4" & 7" Dia.) x 20' (c/w Springs, Screws, Mill Pac)
POWER VENT ACCESSORIES
ZDV4FC Flex Connector 4” Diameter
ZDV7FC Flex Connector 7” Diameter
ZDV4FCL Flex Clamp 4"
ZDV7FCL Flex Clamp 7"
ZDV4SS Spring 4" Standoff Spacer
PVH58WT Wall Thimble for Power Vent
88