Kingsman marquis SKYLINE ZCVRB3622LPE2, Руководство по установке

Страница: 21 / 75

ZCV3622 / ZCVRB3622 Z36FK Fan Kit Installation
The fan can be installed through
the Bottom of the fireplace.
If fireplace is already installed and
non-combustible material is
covering the Lower Access Panel, the burner pan must be removed to install the fan (See Burner System
Removal section).
Mount fan on tabs in bottom of fireplace. Connect fan as per wiring diagram below. Replace all components.
Thermodisc is Located under Burner pan.
Fan installed in fireplace. Burner removed for clarity.
Z36FK Parts List:
[1] Fan c/w 4 ft. cord & 2-
14” leads
[1] Wall Mount Variable speed
control
[1] Thermodisc
[1] Thermodisc disc assembly
mounted to bottom of fireplace
⚠
WARNING
Electrical Grounding Instructions
This appliance is equipped with a three prong (grounding) plug for your protection against
shock hazard and should be plugged directly into a properly grounded three-prong
receptacle. Do not cut or remove the grounding prong from this.
Before Servicing
1. Ensure all power supply is shut off.
2. Label all wires prior to disconnecting when servicing control. Wiring errors can cause
improper and dangerous operation.
3. For fan servicing: Vacuum and clean lint/dirt build-up on the fan blades and motor.
4. When resealing the Burner Pan, use Mill Pac.
Thermodisc
Located under Burner pan
NOTE: Do not allow cords or
wires to come into contact with
the firebox or the underside of the
burner pan.
Fan Mount Tabs
Receptacle
Box
Fan Speed Control
(May be located
outside of fireplace)
Thermodisc
Located under Burner pan
21