21
FIGURE 11 - ODS Pilot, Millivolt pilot flames shown
INSTALLING - Burner System
CLEANING AND SERVICING OF BURNER / ODS PILOT
It is recommended to annually inspect and clean the unit to prevent malfunction and / or sooting. This operation should
be performed by your dealer or a qualified technician.
Remove log set, handling carefully by holding gently at each end. (Refer to
Log Placement,
page 16.) Gloves are
recommended to prevent skin irritation from ceramic.
Annual Cleaning / Inspection
•
Do not use cleaning fluids to clean logs or any part of
the heater.
•
Use a soft bristle brush or a vacuum with brush
attachment.
•
Vacuum loose particles and dust from burner ports,
valve and blower compartments.
•
Vacuum any accumulation of lint from primary mixing
tube.
•
Inspect ODS pilot for operation, accumulation of lint at
the air inlet holes.
•
Verify flame pattern and log placement for proper
operation.
•
Verify that all ports ignite and cross over smoothly from
rear
to front burner.
WARNING
Turn off heater and allow to cool before cleaning. Only
a qualified service technician should service and repair
appliance.
CAUTION
Never use a wire, needle, or similar object to clean
ODS / Pilot. This can damage ODS / Pilot.
WARNING
Failure to keep primary air openings clear, may result in
sooting and property damage.
Содержание GLMVF38MVN
Страница 2: ...2...