Kinghome KW09CQ2B8A, Руководство по обслуживанию

Страница: 69 / 202

66
Technical Information
Service Manual
1. ON/OFF button
2. MODE button
3. FAN button
● When selecting auto mode, air conditioner will operate automatically according to ex-factory setting. Set temperature cant be adjusted and
will not be displayed as well. Press "FAN" button can adjust fan speed. Press "SWING" button can adjust fan blowing angle.
● After selecting cool mode, air conditioner will operate under cool mode. Cool indicator " "on indoor unit is ON(This indicator is not available
▲
" button to adjust set temperature.Press "FAN" button to adjust fan speed.Press "SWING" button to adjust
fan blowing angle.
●
Press this button to turn on the unit. Press this button again to turn off the unit.
.
When selecting dry mode, the air conditioner operates at low speed under dry mode. Dry indicator " " on indoor unit is ON(This indicator
is not available for some models).Under dry mode, fan speed cant be adjusted. Press "SWING" button to adjust fan blowing angle.
●
adjust fan speed. Press "SWING" button to adjust fan blowing angle.
When selecting fan mode, the air conditioner will only blow fan, no cooling and no heating. All indicators are OFF. Press "FAN" button to
● When selecting heating mode, the air conditioner operates under heat mode. Heat indicator " " on indoor unit is ON(This indicator is not.
▲
Note:
● For preventing cold air, after starting up heating mode, indoor unit will delay 1~5 minutes to blow air (actual delay time is depend on indoor
ambient temperature).
●
TURBO button 5.
Set temperature range from remote controller: 16~30
ć
(60.8~86.0
O
F); Fan speed: auto, low speed, medium speed, high speed.
6. ▲/
▲
button
●
Under COOL or HEAT mode, press this button to turn to quick COOL or quick HEAT mode. " " icon is displayed on remote controller.
Press this button again to exit turbo function and " " icon will disappear.
Press "▲" or " ▲ " button once increase or decrease set temperature 1
ć
(33.8
O
F). Holding "▲" or " ▲ " button, 2s later, set temperature
● When setting TIMER ON, TIMER OFF or CLOCK, press "▲" or " " button to adjust time. (Refer to CLOCK, TIMER ON, TIMER OFF
Caution:
●
on remote controller will change quickly. On releasing button after setting is finished, temperature indicator on indoor unit will change
accordingly. (Temperature cant be adjusted under auto mode)
buttons)
Under AUTO speed, air conditioner will select proper fan speed automatically according to ex-factory setting.
Fan speed under dry mode is low speed.
●
Pressing this button can set fan speed circularly as: auto (AUTO), low( ) ,medium( ), high( ).
Press this button to select your required operation mode.
FAN AUTO COOL DRY HEAT
Auto
SWING button 4.
Press this button can select up&down swing angle. Fan blow angle can be selected circularly as below:
● When selecting " ", air conditioner is blowing fan automatically. Horizontal louver will automatically swing up & down at maximum angle.
●
● When selecting "
ǃ ǃ ǃ ǃ
●
When selecting "
ǃ ǃ
Hold " "button above 2s to set your required swing angle. When reaching your required angle, release the button.
Note:
● "
ǃ ǃ
" may not be available. When air conditioner receives this signal, the air conditioner will blow fan automatically.
no display
(horizontal louvers stops at current position)
▲
for some models). Press "▲" or "
available for some models).Press "▲" or " " button to adjust set temperature. Press "FAN" button to adjust fan speed. Press "SWING" button
to adjust fan blowing angle. (Cooling only unit wont receive heating mode signal. If setting heat mode with remote controller , press ON/OFF
button cant start up the unit).