Revision 7 Date: 22 Jun 2020 Page 10 of 13
To read retrieve/read saved data:
At Home Display, press and hold [◄] to enter
Data Browsing mode,
see
picture below.
Use [▲, ▼] to choose test data record saved in instrument’s memory. The
chosen test data record is displayed with date, record number and time
information.
To delete all data records:
Press and hold [OK].
Test Data Browsing mode will exit automatically if no subsequent key is
pressed 10 sec after it was selected.
3.10 Battery
When battery voltage drops below 6.7volt (for Lithium battery), the indicator,
“ ” will be displayed and instrument will beep for a short instant before
powering off automatically. Recharging (for KI6102-xx only) takes 4 - 6 hours;
charging indicator on charger turns green when instrument is fully charged.
See Section 4 (Maintenance) for instructions to replace AA batteries.
Indicates Data
Browsing mode
Selected test data record number
